產品資訊

Specifications:

Electrical Properties : Typical Values Test Procedures / Method
Surface Resistivity
Outer Surface ≦1012  ohms/sq EOS/ESD-S11.11-2001
Metallic Layer 100 ohms/sq EOS/ESD-S11.11-2001
Inner Surface ≦1012 ohms/sq EOS/ESD-S11.11-2001
Charge Decay Less than 0.03 second FTMS-101C Method 4046.1

 

Physical Properties : Typical Values Test Procedures / Method
Bag Thickness：    
Polyester Layer 12 Mic ASTM D-2103
AL Layer 6 Mic ASTM D-2103
Nylon Layer  15 Mic ASTM D-2103
Polyethylene Layer 110 Mic ASTM D-2103
Total Thickness 150 Mic ASTM D-2103
Tensile Strength-TD 437 kgf/cm2 ASTM D882
Tensile Strength-MD 364 kgf/cm2 ASTM D882
Puncture Strength 13 kgf FTMS 101C Method 2065.1
Tear Strength-TD 3.52 kgf ASTM D1004
Tear Strength-MD 3.72 kgf ASTM D1004
Oxygen transmission ≤0.43 cc/m2.day ASTM D3985
Water Vapor transmission ≤0.01 g/m2.day ASTM F1249
Elongation-TD 59.60 % ASTM D882
Elongation-MD 66.60 % ASTM D882
ESD Shielding <10nJ   ANSI/ESD STM11.31-2006
Heat Sealing Conditions    
Temperature 108 ℃~220℃  
Time 0.5~3.5 seconds  
Pressure 30~70 PSI  

請左右滑動表格，可查看更多欄位。

　　　Item　　　 　CAS NO.　 　　Test Method　　 Test Results Detected Limit 　Unit　　
Fluorine(F) 007782-41-4 Analysis was performed by IC N.D. 50 ppm(mg/kg)
Potassium(K+) 024203-36-9 Analysis was performed by IC N.D. 0.001 ug/cm2
Ammonium(NH4+) 014798-03-9 Analysis was performed by IC 0.002 0.001 ug/cm2
Phosphate(Po43-) --- Analysis was performed by IC 0.002 0.001 ug/cm2
Chromiun(Cr) 007440-47-3 Analysis was performed by ICP-MS N.D. 0.001 ug/cm2

If the latest semi-finished or finished product inventory details, test data and/or product specifications are needed, please contact our sales.

Related products